The HE02P-2 HDMI HDbaseT transceiver provides full 3D (all formats), resolutions up to 4Kx2K, multi-channel audio, IR and RS-232 extension over a single CAT5e/6 cable. It’s fully compliant with HDCP, EDID and CEC controls.
The HE02P-2 also extends Ethernet to permit the on line access to TVs, DVD Players and other network devices such as 100Base-T routers, hubs and computers.
IR channel is bi-directional, therefore in the same time you can control the destination device from the location of the source and A/V sources from the location of the destination.
HDMI, RS232, IR and Ethernet signal can be transmitted simultaneously without affecting each other.
With the support of PoH (Power over HDBaseT) feature, the receiver is powered through the CAT5E/6 cable eliminating the need of the external power supply.
Technical Specifications
| TRANSMITTER | |
|---|---|
| HDMI Connector | HDMI Type A x1 |
| HDMI Video | Up to 1080p 60Hz 48bits, 3D, 4K x 2K |
| HDMI Audio | Up to LPCM 7.1, 192 KHz, Dolby TrueHD, DTS-HD, MA |
| HDBaseT Connector | RJ45 x1 |
| HDBaseT Distance | 100 m. (Max) |
| Ethernet Connector | RJ45 x 2 (with 2 LED) |
| Ethernet Data Rate | 10 / 100 Mbps |
| Ethernet Distance | 100 m. (Max) |
| RS-232 Connector | DB9 Female |
| RS-232 Baud Rate | Up to 115200 bps / Full Duplex |
| IR Connector | 3.5mm Phone Jack x2 |
| IR Carrier | 30-60KHz / T: ± 10° / R: ± 55° / 5M / 2 Way |
| Power Supply | Regulated DC 24V 1A |
| Power Consumption | Max 15W, Low Power 5W |
| Operation Temperature | 0 to 55°C |
| Dimensions | 88 x 135 x 30 mm (H) |
| Weight | 300g |
| RECEIVER | |
|---|---|
| HDMI Connector | HDMI Type A x1 |
| HDMI Video | Up to 1080p 60Hz 48bits, 3D, 4K x 2K |
| HDMI Audio | Up to LPCM 7.1, 192 KHz, Dolby TrueHD, DTS-HD, MA |
| HDBaseT Connector | RJ45 x1 |
| HDBaseT Distance | 100 m. (Max) |
| Ethernet Connector | RJ45 x 2 (with 2 LED) |
| Ethernet Data Rate | 10 / 100 Mbps |
| Ethernet Distance | 100 m. (Max) |
| RS-232 Connector | DB9 Male |
| RS-232 Baud Rate | Up to 115200 bps / Full Duplex |
| IR Connector | 3.5mm Phone Jack x2 |
| IR Carrier | 30-60KHz / T: ± 10° / R: ± 55° / 5M / 2 Way |
| Power Supply | PoH (From HE02PT) |
| Power Consumption | Max 15W, Low Power 5W |
| Operation Temperature | 0 to 55°C |
| Dimensions | 88 x 135 x 30 mm (H) |
| Weight | 300g |
- Extends HDMI, RS232 and IR signals with Ethernet over one CAT5e/6 cable
- Uncompressed high definition video up to 1080p 60Hz 16 bits
- HDMI 1.4 with 3D, 4k x 2k support, HDCP and DVI Compliant
- Max. Data Rate 10.2Gbps
- Audio supports up to LPCM 7.1 192KHz, Dolby TrueHD, DTS-HD MA
- Transmission range up to 100 meters with AWG24 CAT5e/6 cable at 1080p resolution
- Bi-directional IR, carrier 30÷60 kHz
- RS232 allows status requests and full control of the destination unit
- Supports 10/100Mbps network
- Supports PoH (Power over HDBaseT), no external power required at receiver
User instruction manual for HE02P-2
She_HE02P_User_Manual_Rev.A2.pdf
CE CERTIFICATION:
CE Conformity document for HE02P-2
CE Conformity
High Resolution Images
Download here the available Hi-Res images of HE02P-2.
Similar devices you may also be interested to check out: