The AR-RX100S receiver receives through a CAT5 cable the transmitter signals and regenerates them toward the output into an RS232 signal and an audio stereo one.
The AR-RX100S receiver should be placed at the end of the CAT5 cable. Maximum acceptable length of cable is 900m.
The AR-RX100S receiver is designed to operate in pair with the AR-TX100S transmitter.
The kit may be ordered using code AR-100S.
Technical Specifications
| Technical Specifications AR-RX100S | |
|---|---|
| RS232 | (TX – DB9Female) – (RX – DB9Male) |
| Protocol | Full duplex, transparent to all baud rate |
| Audio | Signal Type Stereo Audio |
| Bandwidth 20KHz, 0 dB | |
| Impedance 100Ω | |
| Connector 3.5mm mini jack, Female | |
| CAT5 | UTP CAT5, up to 900m |
| Power | 5VDC |
| Dimensions (mm) | (D) 90 x (W) 70 x (H) 21 |
| Weight (Kg) | 0,20 (TX+RX) |
- Extends RS232 and Audio up to 900 m
- Supports all protocol and baud rates.
- Uses easy to install inexpensive CAT5 cable.
- Output reaches up to 900 m.
- Compatible with line level stereo audio signals.
- High ground loop immunity.
- Built-in lightning, power surge and transient protection.
- Remote units come with buffered outputs.
- Compact enclosure.
- Fully transparent path for all protocols and data transfers.
Brochure / leaflet for AR-RX100S:
Smart-AVI_AR-100S_eng.pdf
USER MANUAL:
User instruction manual for AR-RX100S
Smart-AVI_AR-100S_user_manual_eng.pdf
CE CERTIFICATION:
CE Conformity document for AR-RX100S
CE Conformity
High Resolution Images
Download here the available Hi-Res images of AR-RX100S.
