The EL-EX-xxx family is suited to carry an HDMI signal coming from a PC through a low cost CAT5 cable, typical of the LAN domain. The extender consists of a Transmitter and a Receiver devices connected through a low cost CAT5 cable.
The Extenders are based on the HDBaseT technology and some models present the feature PoC (Power Over Cable), namely the possibility to supply the Receiver device through the CAT5 cable.
To achieve optimum performances the use of a CAT5e AWG24 cable is recommended.
The transceivers belonging to this family carry up to 100 m a digital DVI-D signal through a CAT5E or CAT6 cable.
This product belongs to the high-end HDMI transceivers and is suitable to convey through 100 m. of CAT6 cable, one HDMI, one RS232 and two IR signals.
This product belongs to the high-end HDMI transceivers and is suitable to convey through 100 m. of CAT6 cable one HDMI signal.
The transceiver EL-EX-H02N uses HDBaseT technology to extend HDMI uncompressed high-definition video/audio with a data transfer rate of 10.2Gbps. It also meets all HDMI v1.4 standards including full 3D support, Ethernet Channel, audio return channel and 4Kx2K Resolution.
The EL-EX-H02P HDMI HDbaseT transceiver provides full 3D (all formats), resolutions up to 4Kx2K, multi-channel audio, IR and RS-232 extension over a single CAT5e/6 cable. It’s fully compliant with HDCP, EDID and CEC controls.
This product belongs to the high-end HDMI transceivers and is suitable to convey through 70 m. of CAT6 cable one HDMI signal.
EL-EX-HEIP is an HDMI HDBaseT based CAT5 Extender that provides full 3D (all formats) and resolutions up to 4K2K at 24/25/30 Hz with multi-channel audio over a single low cost CAT5e/6 cable. It is fully compliant with HDCP, EDID and CEC control.