CV, UXGA, Audio, RS232 & IR extenders carry all these signals by means of a CAT5 cable with a ‘Point to Point’connection.
The extender kit, also called ‘Transceiver’, is composed of 2 devices, a transmitter and a receiver.
A wide choice of arrangements is also available, depending on the signals type that need to be carried.
All receivers allow to compensate the CAT5 cable losses, to obtain the best possible matching input-output signal. Available lengths for CAT5 cable range from 100m to 500m.
The VDXS kit is composed by the VDX-TXS transmitter and the VDX-RXS receiver.
VDX-TXS
UXGA+RS232 bidirectional Transmitter
The VDX-TXS transmitter is a device designed to convey PC graphic signals and RS232 signals on a CAT5 cable. The RS232 signal may be bidirectional.
VDX-RXS
UXGA+RS232 bidirectional Receiver
The VDX-RXS receiver receives through a CAT5 cable the transmitter signals and regenerates them into UXGA and RS232 signals toward the destinations. The RS232 signal may be bidirectional.
· UXGA, Audio, RS232, IR CAT5 Extender
The XTAVS kit is composed by the XTA-TXS transmitter and the XTA-RXS receiver.
XTA-TXS
UXGA+Audio CAT5 Transmitter
The XTA-TXS transmitter is a device designed to convey PC graphic signals and its stereo audio signals on a CAT5 cable.
XTA-RXS
UXGA+Audio CAT5 Receiver
The XTA-RXS receiver receives through a CAT5 cable the transmitter signals and regenerates them into UXGA and stereo audio signals toward the destinations.
The XTPROS kit is composed by the XTP-TXS transmitter and the XTP-RXS or XTP-RXLS receiver.
XTP-TXS
UXGA+Audio+RS232+IR CAT5 Transmitter
The XTP-TXS transmitter is a device designed to convey PC graphic signals, its stereo audio signals, RS232 and an IR signal as well on a CAT5 cable. The IR signal may be bidirectional, meaning that an SM-LED emitter or an SM-EYE receiver may be connected.
XTP-RXS
UXGA+Audio+RS232+IR CAT5 Receiver
The XTP-RXS receiver receives through a CAT5 cable the transmitter signals and regenerates them into UXGA, stereo audio, RS232 and IR signals toward the destinations.
XTP-RXLS
UXGA+Audio+RS232+IR CAT5 Long range Rec.
The XTP-RXLS receiver receives through a CAT5 cable the transmitter signals and regenerates them into UXGA, stereo audio, RS232 and IR signals toward the destinations.